8 Techniques of Integration

8.5 Integration Strategies

We’ve now seen a fair number of different integration techniques and so we should probably pause at this point to talk a little bit about a strategy to use for determining the correct technique to use when faced with an integral.

There are a couple of points that need to be made about this strategy. First, it isn’t a hard and fast set of rules for determining the method that should be used. It is really nothing more than a general set of guidelines that will help us to identify techniques that may work. Some integrals can be done in more than one way and so depending on the path you take through the strategy you may end up with a different technique than someone else who also went through this strategy.

Second, while the strategy is presented as a way to identify the technique that could be used on an integral keep in mind that, for many integrals, it can also automatically exclude certain techniques as well. When going through the strategy keep two lists in mind. The first list is integration techniques that simply won’t work and the second list is techniques that look like they might work. After going through the strategy, if the second list has only one entry then that is the technique to use. If on the other hand, there is more than one possible technique to use we will have to decide on which is liable to be the best for us to use. Unfortunately there is no way to teach which technique is the best as that usually depends upon the person and which technique they find to be the easiest.

Third, don’t forget that many integrals can be evaluated in multiple ways and so more than one technique may be used on it. This has already been mentioned in each of the previous points, but is important enough to warrant a separate mention. Sometimes one technique will be significantly easier than the others and so don’t just stop at the first technique that appears to work. Always identify all possible techniques and then go back and determine which you feel will be the easiest for you to use.

Next, it’s entirely possible that you will need to use more than one method to completely evaluate an integral. For instance a substitution may lead to using integration by parts or partial fractions integral.

Key Idea 8.5.1      Guidelines for Choosing an Integration Strategy


  1. 1.

    Simplify the integrand, if possible.

  2. 2.

    See if a “simple” substitution will work.

  3. 3.

    Identify the type of integral.

  4. 4.

    Relate the integral to an integral we already know how to do.

  5. 5.

    Try multiple techniques.

  6. 6.

    Try again.

Let’s expand on the ideas of the previous Key Idea.

  1. 1.

    Simplify the integrand, if possible. This step is very important in the integration process. Many integrals can be taken from very difficult to very easy with a little simplification or manipulation. Don’t forget basic trigonometric and algebraic identities as these can often be used to simplify the integral.

    We used this idea when we were looking at integrals involving trigonometric functions. For example consider the integral

    cos2xdx.

    The integral can’t be done as it is, however by recalling the identity,

    cos2x=12(1+cos2x)

    the integral becomes very easy to do.

    Note that this example also shows that simplification does not necessarily mean that we’ll write the integrand in a “simpler” form. It only means that we’ll write the integrand in a form that we can deal with and this is often longer and/or “messier” than the original integral.

  2. 2.

    See if a “simple” substitution will work. Look to see if a simple substitution can be used instead of the often more complicated methods from Calculus II. For example consider both of the following integrals.

    xx2-1𝑑x  xx2-1𝑑x

    The first integral can be done with the method of partial fractions and the second could be done with a trigonometric substitution.

    However, both could also be evaluated using the substitution u=x2-1 and the work involved in the substitution would be significantly less than the work involved in either partial fractions or trigonometric substitution.

    So, always look for quick, simple substitutions before moving on to the more complicated Calculus II techniques.

  3. 3.

    Identify the type of integral. Note that any integral may fall into more than one of these types. Because of this fact it’s usually best to go all the way through the list and identify all possible types since one may be easier than the other and it’s entirely possible that the easier type is listed lower in the list.

    1. (a)

      Is the integrand a rational expression (i.e. is the integrand a polynomial divided by a polynomial)? If so then partial fractions (Section 8.4) may work on the integral.

    2. (b)

      Is the integrand a polynomial times a trigonometric function, exponential, or logarithm? If so, then integration by parts (Section 8.1) may work.

    3. (c)

      Is the integrand a product of sines and cosines, secants and tangents, or cosecants and cotangents? If so, then the topics from Section 8.2 may work. Likewise, don’t forget that some quotients involving these functions can also be done using these techniques.

    4. (d)

      Does the integrand involve b2x2+a2,b2x2-a2,ora2-b2x2? If so, then a trigonometric substitution (Section 8.3) might work nicely.

    5. (e)

      Does the integrand have roots other than those listed above in it? If so then the substitution u=g(x)n might work.

    6. (f)

      Does the integrand have a quadratic in it? If so then completing the square on the quadratic might put it into a form that we can deal with.

  4. 4.

    Relate the integral to an integral we already know how to do. In other words, can we use a substitution or manipulation to write the integrand into a form that does fit into the forms we’ve looked at previously in this chapter. A typical example is the following integral.

    cosx1+sin2xdx

    This integral doesn’t obviously fit into any of the forms we looked at in this chapter. However, with the substitution u=sinx we can reduce the integral to the form

    1+u2𝑑x

    which is a trigonometric substitution problem.

  5. 5.

    Try multiple techniques. In this step we need to ask ourselves if it is possible that we’ll need to use multiple techniques. The example in the previous part is a good example. Using a substitution didn’t allow us to actually do the integral. All it did was put the integral into a form that we could use a different technique on.

    Don’t ever get locked into the idea that an integral will only require one step to completely evaluate it. Many will require more than one step.

  6. 6.

    Try again. If everything that you’ve tried to this point doesn’t work then go back through the process again. This time try a technique that you didn’t use the first time around.

As noted above, this strategy is not a hard and fast set of rules. It is only intended to guide you through the process of best determining how to do any given integral. Note as well that the only place Calculus II actually arises is the third step. Steps 1, 2, and 4 involve nothing more than manipulation of the integrand either through direct manipulation of the integrand or by using a substitution. The last two steps are simply ideas to think about in going through this strategy.

Many students go through this process and concentrate almost exclusively on Step 3 (after all this is Calculus II, so it’s easy to see why they might do that…) to the exclusion of the other steps. One very large consequence of that exclusion is that often a simple manipulation or substitution is overlooked that could make the integral very easy to do.

Before moving on to the next section we will work a couple of examples illustrating a couple of not so obvious simplifications/manipulations and a not so obvious substitution.

Example 8.5.1 Strategies of Integration

Evaluate the integral

tanxsec4x𝑑x

SolutionThis integral almost falls into the form given in 3c. It is a quotient of tangent and secant and we know that sometimes we can use the same methods for products of tangents and secants on quotients.

The process from Section 8.2 tells us that if we have even powers of secant to save two of them and convert the rest to tangents. That won’t work here. We can save two secants, but they would be in the denominator and they won’t do us any good here. Remember that the point of saving them is so they could be there for the substitution u=tanx. That requires them to be in the numerator. So, that won’t work. We need to find another solution method.

There are in fact two solution methods to this integral depending on how you want to go about it.

Solution 1 In this solution method we could just convert everything to sines and cosines and see if that gives us an integral we can deal with.

tanxsec4x𝑑x =sinxcosxcos4xdx
=sinxcos3xdx  substitute u=cosx
=-u3𝑑u
=-14cos4x+C

Note that just converting to sines and cosines won’t always work and if it does it won’t always work this nicely. Often there will be a lot more work that would need to be done to complete the integral.

Solution 2 This solution method goes back to dealing with secants and tangents. Let’s notice that if we had a secant in the numerator we could just use u=secx as a substitution and it would be a fairly quick and simple substitution to use. We don’t have a secant in the numerator. However we could very easily get a secant in the numerator by multiplying the numerator and denominator by secant (i.e. we multiply the integrand by “1”).

tanxsec4x𝑑x =tanxsecxsec5x𝑑x  substitute u=secx
=1u5𝑑u
=-141sec4x+C
=-14cos4x+C

In the previous example we saw two “simplifications” that allowed us to evaluate the integral. The first was using identities to rewrite the integral into terms we could deal with and the second involved multiplying the numerator and denominator by something to again put the integral into terms we could deal with.

Using identities to rewrite an integral is an important “simplification” and we should not forget about it. Integrals can often be greatly simplified or at least put into a form that can be dealt with by using an identity.

The second “simplification” is not used as often, but does show up on occasion so again, it’s best to remember it. In fact, let’s take another look at an example in which multiplying the integrand by “1” will allow us to evaluate an integral.

Example 8.5.2 Strategy for Integration

Evaluate the integral

11+sinx𝑑x

SolutionThis is an integral which if we just concentrate on the third step we won’t get anywhere. This integral doesn’t appear to be any of the kinds of integrals that we worked on in this chapter. We can evaluate the integral however, if we do the following,

11+sinx𝑑x =11+sinx1-sinx1-sinx𝑑x
=1-sinx1-sin2x𝑑x

This does not appear to have done anything for us. However, if we now remember the first “simplification” we looked at above we will notice that we can use an identity to rewrite the denominator. Once we do that we can further manipulate the integrand into something we can evaluate.

11+sinx𝑑x =1-sinxcos2x𝑑x
=1cos2x-sinxcosx1cosxdx
=sec2x-tanxsecxdx
=tanx-secx+C

So, we’ve just seen once again that multiplying by a helpful form of “1” can put the integral into a form we can integrate. Notice as well that this example also showed that “simplifications” do not necessarily put an integral into a simpler form. They only put the integrand into a form that is easier to integrate.

Let’s now take a quick look at an example of a substitution that is not so obvious.

Example 8.5.3 Strategy for Integration

Evaluate the integral

cosxdx

SolutionWe introduced this integral by saying that the substitution was not so obvious. However, this is really an integral that falls into the form given by 3e in Key Idea 8.5.1. Many people miss that form and so don’t think about it. So, let’s try the following substitution.

u=x  x=u2  dx=2udu

With this substitution the integral becomes,

cosxdx=2ucosudu

This is now an integration by parts. Remember that often we will need to use more than one technique to completely do the integral. This is a fairly simple integration by parts problem so we’ll leave the remainder of the details for you to check.

cosxdx=2(cosx+xsinx)+C.

It will be possible to integrate every integral assigned in this class, but it is important to note that there are integrals that just can’t be evaluated. We should also note that after we look at series in Chapter 9 we will be able to write down a series representation of many of these types of integrals.

Exercises 8.5

 

Problems

In Exercises 1–51, compute the indefinite integral.

  1. 1.

    sin-1xdx

  2. 2.

    cos32xsin22xdx

  3. 3.

    4x2-12x-10(x-2)(x2-4x+3)𝑑x

  4. 4.

    tanxsec5xdx

  5. 5.

    1(x2+25)3/2𝑑x

  6. 6.

    4-x2x𝑑x

  7. 7.

    x3+1x(x-1)3𝑑x

  8. 8.

    x4+4x-x2𝑑x

  9. 9.

    x3ex2𝑑x

  10. 10.

    x+83x𝑑x

  11. 11.

    e2xsin3xdx

  12. 12.

    cos3xsin3xdx

  13. 13.

    x4-x2𝑑x

  14. 14.

    x5-x3+1x3+2x2𝑑x

  15. 15.

    1x3/2+x1/2𝑑x

  16. 16.

    exsecexdx

  17. 17.

    x2sin3xdx

  18. 18.

    sin3xcosxdx

  19. 19.

    exex+1𝑑x

  20. 20.

    x24x2+9𝑑x

  21. 21.

    sec2xtan2xdx

  22. 22.

    xcscxcotxdx

  23. 23.

    x2(8-x3)1/3𝑑x

  24. 24.

    sinxdx

  25. 25.

    x3-2x𝑑x

  26. 26.

    e3x1+ex𝑑x

  27. 27.

    x2-4x+3x𝑑x

  28. 28.

    x316-x2𝑑x

  29. 29.

    1-2xx2+12x+35𝑑x

  30. 30.

    tan-15xdx

  31. 31.

    etanxcos2x𝑑x

  32. 32.

    17+5x2𝑑x

  33. 33.

    cot6xdx

  34. 34.

    x3x2-25𝑑x

  35. 35.

    (x2-sech24x)𝑑x

  36. 36.

    x2e-4x𝑑x

  37. 37.

    311-10x-x2𝑑x

  38. 38.

    x3-20x2-63x-198x4-1𝑑x

  39. 39.

    tan3xsecxdx

  40. 40.

    (x3+1)cosxdx

  41. 41.

    9-4x2x2𝑑x

  42. 42.

    (5-cot3x)2𝑑x

  43. 43.

    1x(x-x4)𝑑x

  44. 44.

    sinx1+cosx𝑑x

  45. 45.

    x2(25+x2)2𝑑x

  46. 46.

    2x3+4x2+10x+13x4+9x2+20𝑑x

  47. 47.

    (x2-2)2x𝑑x

  48. 48.

    x3/2lnxdx

  49. 49.

    x22x+33𝑑x

  50. 50.

    xex(x+1)2𝑑x

  51. 51.

    tan7xcos7xdx

  52. 52.
    Show that if t=tanθ2, then sinθ=2t1+t2cosθ=1-t21+t2anddθdt=21+t2. Explain how this substitution transforms a rational trigonometric function into a rational function. (This is known as the tangent half-angle substitution and sometimes known as the Weierstrass substitution.)
  53. 53.

    Use the substitution of the previous exercise to evaluate secθdθ.

  54. 54.

    Use the substitution of the previous exercise to evaluate 1sinθ+tanθ𝑑θ.

Modern Campus CMS